![topDRILL nc [G4]](/fileadmin/user_upload/SCHRAML/Products/topDRILL_nc/Header_TOPDRILL-NC.jpg "topDRILL nc [G4]")
Glass Drilling Machine
topDRILL nc [G4]
Fully Automatic Vertical Double-Sided Drilling Center
The topDRILL nc is a fully automatic double-sided glass drilling machine with digital drilling heads and an automatic glass transport. All movements are controlled via the 15 inch display, manual adjustments are not required. The drills are automatically measured after every change, the operator only has to mount the glass sheet and start the program. Glass thicknesses of up to 40 mm and drilling diameters of up to 100 mm support a flexible production.
Freely configurable
The topDRILL nc can be configured according to the customer’s requirements. The modular extension of the machine length, the choice between two machine heights as well as the freely definable direction of movement give a range of customizing options. Versatile extensions – such as an automatic drill sharpening unit or a data connection to an ERP system – allow adapting the topDRILL nc to the specific requirements of the production.
Technical Data
Technical Data
| topDRILL nc [G4] | Technical Data |
|---|---|
| Glass height | Open at the top (130 nc) / 2,600 mm (240 nc) |
| Max. processing height | 1,300 mm (130 nc) / 2,400 mm (240 nc) |
| Glass thickness | 3 - 40 mm |
| Minimum glass size | 600 x 150 mm |
| Maximum glass size | approx. 3,200 mm, can be increased up to 8,000 mm with extension modules |
| Transport height | 600 mm |
| Angle of inclination | 7° (+/- 1°) |
| Max. bore diameter | 100 mm |
| Spindle speed | 0 – 5,000 rpm |
| Spindle power (rating) | 2 x 5.5 kW |
| Max. load | 150 kg/lm |
- Very compact construction and modular design
- Automatic drilling length measuring
- All movement axes with servo motors
- Simple operation and programming
The Highlights
CMX quick-change system
This manual quick-change system was specially developed from Schraml Glastechnik in order to use all commercially available standard drills in combination with a simple adapter. Changing of the drill bits is a question of two "clicks" and a few seconds! The annoying release and clamping with two keys behind or under the machine is a thing of the past. The system consists of the CMX-quick-change chuck (front and rear mounted) and 10 pieces of XTE adapters for the most common diameters.
Automatically dressing of drill bits
The dressing unit for drill bits is mounted together with the automatic calibration unit - both made in stainless steel. Especially in large-scale production it is important, that the tools are dressed and calibrated at a regular interval. Absolutely no manual intervention is necessary to refresh and finally calibrate the drills during regular operation. The dressing interval is pre-set, but can be modified by the operator depending on his parameters and the tool quality. The consumption of the dressing stone is optimized by multiple use.
All the cycle parameters can be modified using the clear text display in the software.
Integrated storage box for drilling tools
On all positions of the topDRILL machine and the extension modules, the practical INNODIA tool storage box "MAG-20" can be integrated in the rearside cover. Even later you can decide to add this complement to your machine and to increase the order at this workplace.
Due to safety reasons the storage boxes are allowed for manual machines only!
Please contact me
Feel free to contact me if you have any further questions.
Horst Schraml
