MSA-A30

Manual sealing machine for insulating glass

The MSA-A30 is a hydraulic sealant applicator for two-component materials, with an adjustable mixing ratio.

How is the sealing machine configured?

The compact design and optimised arrangement of the machine components facilitate a small footprint in conjunction with the largest possible working area for the operator. During development, the focus was placed on particularly easy handling for the operator and service personnel.

How does the sealing machine for insulating glass work?

A static precision mixer guarantees optimum mixing of the material. Handling is simple and effortless, thanks to the weight relief of the head with a spring balancer and a swivel joint on the hand gun. Sealing larger units is made possible with the help of an extended bracket arm.

Who is the sealing machine suitable for?

Every insulating glass manufacturer benefits from this machine. From the small company that uses it to seal every product, to the highly automated operation where one-off units are produced manually. The use of high-quality components keeps operating and maintenance costs to a minimum.

What advantages does the machine offer?

Thorough mixing by a static precision mixer
Simple material check (for mixing ratio of base and catalyst)
Minimal space requirement due to compact machine design
Adjustable mixing ratio from 7:1 to 12.5:1
Flexible location -> can be moved with lift truck at any time
Thorough mixing by a static precision mixer
Extended arm to 3m radius enables sealing of large insulating elements

MSA-A30
Output:	1600 cm³/min
A side actuation:	Hydraulic
B side actuation:	Hydraulic
Profile width:	6-24 mm
Working radius:	3 m
Basic drum:	200 l
Catalyst drum:	20 l
Materials:	PU/PS/SI
Catalyst viscosity:	Pasty
Mixing ratio:	Variable 7:1 to 12.5:1
Mixing control:	yes
Mix system:	Trumpet mixer
Sub-structure:	prepared for lift truck transport
Rinsing pump:	no
Seals:	Material-dependent
Pot life monitoring:	no
Product segment:	intermediate
Control system:	EATON logic module
Control panel:	no, on/off via switch

Suitable for two-component silicone, polyurethane and polysulphide with catalyst paste
Easy and ergonomic working due to:
- Weight relief of the head with a spring balancer
- Swivel joints on the hand gun
- Flexibility and smoothness of movement, and long arm with 3m radius
- Simple design of the operating and control elements
Suitable for wide spacers and large insulating glass lites sheets due to constantly high output rate