ARS-TBX/Y/Z

The LiSEC float glass breakout system automatically breaks all XYZ sub-plates in the optimisation, edge and residual fractures at the front and rear, as well as the side trim cuts continuously, quickly and with consistently high breaking edge quality. Thanks to the optionally available electric design of the breaker heads, individual process parameters are possible for each glass type and thickness to deliver even better breakage results for optimum precision and grind additions! Any Z-breakage shapes are broken out on a downstream manual breakout table and fed back into the line. An automatic turning unit ensures the correct position of the finished sheets before they are either removed manually or fed to a robot unloading system or sorting buffer.

HOW IS THE LINE LAID OUT FOR THE AUTOMATIC BREAK-OUT OF X SUB-PLATES?

ARS: X-trim cut front and rear

TBX: Break-out of X-cuts

TCY-A: Y-trim cut front and rear

TBY: Break-out of Y-cuts

TBZ: Break-out of Z-cuts

RBA-SZ: Z trim cut, rear

BTA-A SDE: Glass rotating device for correct positioning during in-feed into a sorting system

System operator: Monitors the system and empties the container for broken glass and, if necessary, breaks out shapes.

WHAT ADVANTAGES DOES THIS LINE DELIVER?

• Output of up to 240 sheets per hour
• Increase in the degree of automation à No manual breaking out of rectangular sheets is necessary
• Higher edge quality thanks to pneumatically or optionally electronically controlled breaker heads
• Prevention of sheet breakage and grind addition savings
• No contact with the coated glass surface

HOW DOES FLOAT GLASS PROCESSING TAKE PLACE?

LiSEC breakout systems for the automatic break-out of edge, remnant and sub-plate cuts, have a patented three-point breakout system. The breaker heads of this three-point technology only touch the glass on the uncoated underside and in the edge area where the Low-E or solar control coating has previously been removed (edge deletion process). This ensures that there is no contact with the surface, which minimises the risk of scratches during the manufacturing process and ensures top quality. 

HOW ARE SHAPES BROKEN OUT?

Shapes are broken out manually at the end of the system, after automatic edge, remnant and X-Y breakage of the sub-plate on a manual breakout table with the aid of integrated breaker bars. 

WHO IS THIS GLASS CUTTING LINE SUITABLE FOR?

This line is the optimum solution for all large-scale operations that want to produce perfect glass edges more economically, quicker and easier. The compact design of this line with automatic XYZ breakage is suitable for almost any space and can be expanded as required.

IS IT ALSO POSSIBLE TO RETROFIT THE ELECTRIC BREAKER HEADS?

Yes, it is possible with an industrial PC (IPC) 2018 and onwards.